-
Can making machine dryer can dryer High frequency electromagnetic dryer
Compared with the belt, the stainless steel chain has no wearing parts. Compared with the belt, it will be replaced after a long time of use, or it will be scratched if it gets stuck during the transportation process. Users will use it with peace of mind.
-
1L-25L Square Cans Oil Cans Round Cans Food Cans Automatic Round-Forming Machine
Our company’s Automatic Round-Forming Machineeach shaft adopts centralized refueling mode, convenient and save maintenance time. In order to prevent the problem of chafing the body of the high-speed feeding can, several pieces of reinforced glass are used as the can bearing plate under the rolling circle of the feeding can track, and imported PVC nylon bearings are used to protect the can track. The a Automatic Round-Forming Machine consists of 12 shafts (each power shaft is evenly equipped with end bearings at both ends) and three knives to form a winding channel. Each can body is completed after three shafts prewinding, six axes and three knives kneading iron, and three shafts winding, which solves the problem of different sizes of the coiled can body circles due to different materials. After this treatment rolled out of the can body without obvious angles and scratches (coated iron is the most visible). In addition, deep groove ball bearings are adopted for the lower rolling shaft to avoid the pollution of welding seam caused by the maintenance of needle roller bearings and the overflow of refueling too much.
-
Round cans square cans round-forming machine can making machine
The rounding machine consists of 12 shafts (end bearings are evenly installed at both ends of each power shaft), and three knives to form a rounding channel. When each can is rolled, it is pre-rolled by three shafts, six shafts, three knives, kneading iron, and three knives. It is completed after the shaft is rolled into a circle. It overcomes the problem of different sizes of rolled cans due to different materials; after this treatment, the rolled cans have no obvious edges, corners and scratches (coated iron is the easiest to see). Each axis of the rolling machine adopts centralized oiling method, which is convenient and saves maintenance time. In order to prevent the scratching of the can body during the high-speed delivery, multiple pieces of reinforced glass are used as the tank support plate under the roll circle of the can delivery channel, and imported PVC nylon bearings are used for the tank protection track. In order to ensure that the rounded can body is accurately fed into the protective cage, an air cylinder presses the tank guard plate to push it forward when sending the can.
-
Industrial chiller for can making machine
1.The fully cover compressor comes from the European, America and Japanese famous brand, uses cooling medium for heat emission and has the overheat protection breaker, the machine has the advantages of reliable running, energy saving and low noise.
2.Equipped with the components of power supply, high and low pressure protection, temperature controller, the water valves, dryer filter, etc. to keep the machine running smoothly.
3.This cooling water machine has two types-water cooling type and air cooling type. The water cooling type occupies small space and low noise; the air cooling type has compact structure and easy operation.
4.The machine design and manufacture is comply with the related regulations and laws. All the machines have been commissioned before delivery, The user must link the power supply, the intake and outlet of frozen water, the intake and out of the cooling water (the cooling water type) according to the manual and can operate now. -
Can making machine leak hunting machine for metal can round can square can
Non destructive testing;
Temperature compensation system, improve the detection accuracy.
Equipment interface humanization, easy operation.
Fast changeover and height adjustment
Using European brand sensors to ensure high accuracy of test results, and customized PLC system can save the test results. -
Station combination machine (Flanging/Beading/Seaming)
Equipment with two separating knives on cone & dome magazine
Vertical design easy to connect with other machines
Recyclable central lubricating system
Inverter for variable speed control
Swing flang for a more accurate width of flang
Triple-blade end separating system for non-scratch end.
Vertical design easy to connect with other machines.
Recyclable central lubricating system.
Inverter for variable speed control.
Full automatic control system for can making line requirements
Multi-sensor design for machine and personnel safety.
No can no end system.
Double rolls beading
Rail beading
Bead cluster are formed due to pressing between outer beading roller
and inner beading roller. With the characteristics of adjustable beading
revolution, deeper bead depth and better rigidity.
